Siding Cost in Wichita, KS: Published Ranges & What Drives Price

Siding prices at a glance

Read this first: the numbers below are general industry ranges published by the sources named in each row, gathered in October 2026. They are national estimates, not quotes and not promises, and they are not prices from Siding Companies Wichita or any contractor. Prices are set by the siding contractor that quotes your job, and your actual cost depends on your house, the material, local labor and what is found when old siding comes off.

Published prices change, and sources update their pages and methods. Check the linked pages for current figures. Ranges are national; Wichita-area prices can be higher or lower.

Whole-house siding replacement: what drives the price

Two houses of the same size on the same Wichita street can get very different siding quotes. The biggest factors:

• Wall area. Siding is priced by the square (100 square feet of wall). Two-story homes and homes with many gables have more wall area per square foot of floor. See how much siding do I need?
• Material and product line. Within each material, premium lines, thicker panels, insulated backers and factory finishes cost more.
• Removal and disposal. Tearing off one or more old layers adds labor and dumpster costs (see removal).
• Repairs underneath. Rotted sheathing, sill plates and framing found during tear-off are usually priced separately. Ask how they will be handled before you sign.
• Trim, soffit, fascia and wraps. Corner boards, window wraps, frieze boards and eaves can be a large share of the total.
• House wrap, flashing and insulation board. Worth it, but they add cost.
• Height and access. Tall walls, steep lots and tight side yards need more equipment and time.
• Permits. Required for larger jobs in most cities.

Example (math illustration only): a ranch with about 1,800 square feet of wall, multiplied by HomeGuide's published vinyl range of about $4 to $12 per square foot, gives roughly $7,200 to $21,600 before removal, trim and repairs. This is arithmetic on a published range, not a quote.

See siding replacement.

New construction and addition siding

Siding a new home, addition or garage skips tear-off, but still involves house wrap, flashing, trim and the material itself. Labor alone is often listed at about $2 to $6 per square foot in HomeGuide's guide. Matching an addition to an existing house can add cost if the original product is hard to find. See siding installation.

Siding repair cost

Angi's published guide puts typical siding repairs at about $367 to $1,520, averaging around $925, or roughly $26 per square foot, nationally. Its per-square-foot repair ranges by material run about $2 to $4 for vinyl, $3 to $11 for fiber cement, $4 to $13 for wood and $5 to $7 for aluminum. Many contractors have a minimum charge for small jobs, and matching hard-to-find profiles can push repairs higher. See siding repair and repair vs. replacement.

Hail damage siding cost

Hail repairs range from a few panels to a full re-side, so there is no single number. When insurance is involved, the insurer's estimate, your deductible and how your policy handles matching drive what you pay. A contractor's quote and the adjuster's estimate may differ; the contractor can document items the adjuster missed. See hail damage siding.

Vinyl siding cost

HomeGuide lists installed vinyl at about $4 to $12 per square foot, the widest range of any material because vinyl spans thin builder-grade panels to thick, insulated premium lines. In the 2025 Cost vs. Value report, a vinyl siding replacement project averaged $17,950 nationally and recouped about 97% at resale (Zonda / JLC, 2025 Cost vs. Value report). See vinyl siding.

Fiber cement and James Hardie cost

HomeGuide lists installed fiber cement at about $6 to $15 per square foot. Weight, cutting with dust control and paint or factory finish all affect labor. The 2025 Cost vs. Value report's fiber-cement siding replacement averaged $21,485 nationally and recouped about 114% at resale. See fiber cement siding.

LP SmartSide (engineered wood) cost

HomeGuide lists installed engineered wood at about $7 to $12 per square foot. Prefinished boards cost more up front than primed boards but skip field painting. See LP SmartSide siding and LP SmartSide vs. James Hardie.

Steel siding cost

HomeGuide lists installed steel at about $7 to $16 per square foot. Gauge, profile and finish drive the price; agricultural panels on outbuildings are typically priced differently from residential steel lap siding. See steel siding.

Wood and cedar siding cost

HomeGuide lists installed cedar at about $6 to $16 per square foot and board and batten at about $5 to $13. Wood also carries ongoing paint or stain costs. See wood siding.

Stone veneer cost

HomeGuide lists stone accents at about $10 to $45 per square foot installed, a wide range spanning manufactured and natural stone. In the 2025 Cost vs. Value report, a manufactured stone veneer project averaged $11,702 nationally and recouped about 208%, the third-highest return of any project tracked. See stone veneer.

Soffit and fascia cost

Angi lists soffit replacement at about $6 to $30 per linear foot, with a national average around $2,200, and fascia at about $7 to $22 per linear foot. Rotted rafter tails or sub-fascia add to the cost. See soffit and fascia.

Siding and windows together

There is no single published range for combined siding and window projects, because window prices vary enormously by type, size and brand. Doing both together can save some trim and setup labor and gives better flashing. Ask for quotes both together and separately. See siding and windows and should you replace windows and siding at the same time?

Old siding removal, asbestos and lead

HomeGuide lists old siding removal at about $0.70 to $2.00 per square foot. Multiple layers, asbestos-cement shingles and lead-painted surfaces add cost: asbestos material should be handled by trained professionals (EPA, protect your family from exposures to asbestos), and contractors disturbing paint on pre-1978 homes must follow lead-safe rules (EPA, Renovation, Repair and Painting (lead-safe) program). See old asbestos and aluminum siding replacement.

Insurance and your deductible

This is general information, not insurance or legal advice. Every policy is different, so check yours or ask your agent.

• What is usually covered. Homeowners policies commonly cover sudden damage from hail and wind, minus your deductible. Wear and tear is not covered.
• Deductibles. Some policies have separate or percentage-based wind and hail deductibles. Know yours before you file. The Kansas Insurance Department's shopper's guide explains coverage basics (Kansas Insurance Department, Home and Renters Shopper's Guide).
• Matching and cosmetic damage. Policies differ on whether they pay to replace undamaged siding so it matches, and some exclude cosmetic dents on metal.
• Deductible waivers are a red flag. Be wary of any contractor offering to cover or waive your deductible.
• Assignment of benefits. Kansas law sets rules if you sign benefits over to a contractor, including a five-business-day cancellation right (K.S.A. 50-6,143 (assignment of insurance benefits to a contractor)).

Example (math illustration only): if hail damage is estimated at $9,000 and your wind/hail deductible is $2,500, the insurer's payment toward the covered repair would be about $6,500, subject to your policy's terms. If the estimate is below your deductible, a claim would not pay anything.

See siding insurance claims in Kansas.

What a good written siding quote includes

1. The exact product: brand, line, profile, thickness or gauge, color and finish.
2. Squares of siding and linear feet of trim, soffit and fascia.
3. House wrap, flashing, insulation board and how windows and doors are trimmed.
4. Removal and disposal of old siding, including any special handling.
5. How rot or framing repairs are priced and approved.
6. Permits, cleanup and the payment schedule.
7. Manufacturer warranty and the contractor's written workmanship warranty.

Get a local quote in your town

Published ranges only go so far. Local conditions matter: older homes with layered siding in Wichita, Augusta, Wellington and Newton, rebuild-era vinyl in Haysville and Andover, acreages with shops around Andale, Rose Hill and Clearwater, and spring hail everywhere. See the notes for your town:

• Siding in Wichita
• Siding in Bel Aire
• Siding in Park City
• Siding in Valley Center
• Siding in Maize
• Siding in Goddard
• Siding in Andale
• Siding in Cheney
• Siding in Clearwater
• Siding in Haysville
• Siding in Derby
• Siding in Mulvane
• Siding in Wellington
• Siding in Andover
• Siding in Rose Hill
• Siding in Augusta
• Siding in El Dorado
• Siding in Newton
• Siding in Hutchinson

Read more about each service

• Siding Replacement: Tear off worn or damaged siding and re-side the house in vinyl, fiber cement, engineered wood or steel.
• Siding Installation: New siding for additions, new builds, garages and shops, installed to the manufacturer's instructions.
• Siding Repair: Fix cracked, loose, blown-off or rotted sections before water gets behind the wall.
• Hail Damage Siding Repair: Check, document and repair hail-cracked vinyl, dented steel and chipped fiber cement after a storm.
• Vinyl Siding: Low-maintenance vinyl in standard and insulated grades, chosen for Kansas wind and hail.
• Fiber Cement & James Hardie Siding: Rigid, noncombustible siding with a painted-wood look; James Hardie lists Kansas in its HZ5 zone.
• LP SmartSide Engineered Wood Siding: Engineered wood siding with a real wood look, lighter than fiber cement and popular on garages and shops.
• Steel & Metal Siding: Durable steel lap and panel siding for homes, shops and barns, with a baked-on finish.
• Wood & Cedar Siding: Repair or replace wood and cedar siding on older and custom homes, including lead-safe work.
• Stone Veneer Accents: Manufactured stone wainscots, columns and entry accents that pair with new or existing siding.
• Soffit & Fascia: Replace rotted fascia and soffit, add vented soffit for attic airflow, and wrap fascia in aluminum.
• Siding & Window Projects: Coordinate new siding with new windows so flashing, trim and insulation are done in one pass.
• Old Asbestos & Aluminum Siding Replacement: Replace aging asbestos-cement, aluminum, hardboard and T1-11 siding with the right precautions.
• Siding Insurance Claims in Kansas: How hail and wind siding claims work in Kansas, from deductibles to matching and supplements.

Related guides

• How to File a Hail Damage Siding Claim in Kansas
• Vinyl vs. Fiber Cement Siding for Kansas Homes
• How Long Does Siding Last in Kansas Weather?
• How to Choose a Siding Contractor in Wichita
• Siding Repair vs. Replacement: How to Decide
• 12 Signs It Is Time to Replace Your Siding
• How Much Siding Do I Need? Measuring in Squares
• LP SmartSide vs. James Hardie: Which Is Better in Kansas?
• Does Siding Need a Permit in Wichita?
• What Is T1-11 Siding? Problems, Repair and Replacement
• Can You Put New Siding Over Old Siding?
• Should You Replace Windows and Siding at the Same Time?
• Best Siding for Hail in Kansas
• Storm Chasers and Door-to-Door Siding Contractors in Kansas

Sources: HomeGuide, house siding cost; Angi, siding repair cost; Angi, soffit replacement cost; Angi, fascia board replacement cost; Zonda / JLC, 2025 Cost vs. Value report; Kansas Insurance Department, Home and Renters Shopper's Guide; K.S.A. 50-6,143 (assignment of insurance benefits to a contractor); EPA, protect your family from exposures to asbestos; EPA, Renovation, Repair and Painting (lead-safe) program.

Good to know: Requesting a quote is free and there is no obligation. Ask for a written quote that lists the material, the scope, permits and the warranty terms.